What do I do when my Apple watch says please continue setup? I’m facing difficulty connecting my apple watch to my iPhone. It keeps saying “please continue setup” what should I do?
If you have an apple watch and an iPhone, the Apple Watch will automatically detect your phone. If it doesn’t, set up your Apple Watch by following these steps.
- Make sure that your iPhone and your watch are on the same wireless network.
- Tap on Model Number on your iPhone.
- Tap Continue Setup on your Apple Watch.
- Enter your Passcode on your Apple Watch. The Passcode is required so that you can use your Apple Watch.
- Tap Next on your Apple Watch. Then tap on Date of Birth.
- Tap Done on your Apple Watch. Now tap on Pair on your iPhone.
- Enter your iCloud email address and password on your iPhone.
- Follow these steps on your iPhone to complete the pairing process.
- After establishing a connection, you can view your notifications on your Apple Watch
How to Fix the Apple Watch Stuck on Please Continue Setup on iPhone
I have an apple watch and I was trying to update it. But when I tried to connect my phone, the apple watch has been stuck at the “Please Continue Setup” screen. How can I fix this issue?
RESTART/ RESET YOUR APPLE WATCH
This happens because of a problem with your iCloud account. You require to “reset your password” for that account to be able to use it again.
To do so, follow these steps:
- Enter your email address and choose a new password.
- Tap Continue.
- If you see a message saying that your device has been locked out due to too many failed attempts, tap OK.
- Your device will now restart. When it’s done, you’ll be asked whether you want to restore from a previous backup or set it up as usual. Choose Setup as usual.
- Restart your watch again by pressing and holding the side button until the Apple logo appears.
- Follow the steps on the screen to complete the setup process
- Once the setup process completes, your watch should start working normally.
- If you’re still unable to connect your Apple Watch to your phone, try turning off your watch first (press and hold the side button until the power icon appears). Then turn it back on and try reconnecting.
- If nothing works and you’re unable to resolve an issue yourself, contact Apple Support.
What’s the Longest Facetime World Record
How can we pair and set up Apple Watch Apple Support?
Apple Watch is a great device that can be used for many purposes. It has become an essential part of our lives, as it helps us in keeping track of our health, fitness, and other activities. However, pairing the watch with iPhone or iPad is not easy. To ensure that you can use all features on an Apple Watch, you need to follow certain steps.
Paired successfully! Please check your phone’s Bluetooth settings and ensure they’re enabled. This guide will teach you how to pair your iPhone to your apple watch.
To do so, follow these steps:
- Open the App Store app on your iPhone.
- Tap the Search button at the top right corner of the screen. Type “pair” into the search bar and tap the first result.
- On the next page, tap “Add”.
- Your Apple Watch should appear on the list of paired devices. If it doesn’t, try restarting both your iPhone and Apple Watch.
- Press and hold down the side button until the Apple Watch vibrates. Then release it.
- The Apple Watch should now display the name of your iPhone. Tap the name to connect them.
- Once connected, open the Settings app on your iPhone.
- Make sure that the option to turn off Bluetooth is turned off.
- Now go back to the Apple Watch app on your iPhone. And click the button that is located at the left bottom corner of the screen.
- Select the Bluetooth icon.
- Turn on Bluetooth on your Apple Watch.
- Now return to the Apple Watch App on your iPhone.
- Press and hold down the side buttons until the Apple Watch vibrate. Release it.
- A notification should pop up asking whether you wanna accept the connection or not. If yes then Tap OK.
- Your Apple Watch should now be paired with your iPhone.
How to remove Apple Watch from iPhone
If you have accidentally paired your Apple Watch with your wrong iPhone, then here is how you can unpair it from your iPhone.
Steps to Unpair Apple Watch from iPhone
- Scroll down to find the Apple ID associated with your Apple Watch.
- Tap on the link beside the Apple ID.
- Enter your password to confirm.
- After confirming, click Remove Pairing.
- Your Apple Watch will no longer be paired with your iPhone anymore.
How to sync Apple Watch with iPhone
When the connection is established between your Apple Watch and your iPhone, then you can start syncing data between the two devices. To sync data between your Apple Watch and iPhone, follow these steps.
- Launch the Apple Watch app on iPhone.
- Tap the button at the top right-hand corner of the screen. Tap “Settings”.
- Tap “General”.
- Tap “Bluetooth & Devices”.
- Check the box next to “Sync Apple Watch”.
- Tap “Done”.
- Your Apple Watch should begin syncing with your iPhone.
Note: If you don’t see any changes after syncing, then you might have to wait for some time before the data gets synchronized.
How can We Delete the Payment Method on the DoorDash App
How you can hard reset an Apple Watch?
If your Apple Watch is stuck in the “Sending” state, or if it has been frozen for some reason and won’t respond to any of your attempts at recovery, then you may need to perform a hard reset. This will remove all data from your watch, including apps, music, photos, messages, and more. If you are using iCloud, this will also delete all of your content stored on iCloud as well. To perform a hard reset:
- Press and hold down the Digital Crown until the Apple logo appears on the screen.
- While holding down the crown, press and release the side button (the one with the arrow pointing up). The Apple logo should disappear, and the Apple Watch will vibrate once.
- Release both buttons by pressing them simultaneously. You should see the Apple logo reappear.
- Once the Apple logo disappears, wait about 5 seconds before releasing the side button again. Now your Apple Watch will come to the normal position.!
- If you have an iPhone connected to your Apple Watch via Bluetooth, you can use that phone to restore your watch. Connect your iPhone to your computer, open iTunes, select your Apple Watch under Devices, click Restore, and follow the instructions.
- If you don’t have an iPhone, you would have to contact Applecare for support.
How can you avoid having to set up your Apple Watch?
When the watch is first connected, it will ask if you want to set up the device and then give you a few options for how to proceed. If you don’t have an iPhone or iPad nearby, you can skip this step by tapping “Skip” on the screen. You can also tap “Cancel” at any time during the setup process.
How can we connect my Apple Watch to my Mac?
Connecting your Apple Watch to your Mac is easy: just plug in the USB-C cable that came with your Apple Watch. Your Apple Watch will automatically detect your Mac and pair it with it.
How can I ensure that the Apple Watch remains configured on my iPhone?
If you have an Apple Watch, and your iPhone is not connected to a power source or charger, then it will automatically configure itself when you connect them. This will reset all of your settings back to their factory defaults. You should be able to use the watch without any problems after this process has been completed. If you are having issues with the Apple Watch, try disconnecting it from your phone for a few minutes and then reconnecting it. If this does not work, you may need to contact AppleCare support.
Why can’t I pair my Apple Watch?
If you have an iPhone and want to use your Apple Watch, you may be wondering why it won’t work. It is possible that the watch will not pair with your phone because of a problem with the Bluetooth connection between them. If this happens, so you have many ways that you can try to solve the issue.
- First, make sure that your iPhone and your Apple Watch are connected to the same Wi-Fi network. This should help if one device has broken its connection to the network.
- Next, check the settings on each device. Make sure that the devices are paired correctly with each other. You might need to turn off any passcode or security features that are preventing the two devices from connecting.
- Finally, restart the devices. Sometimes a simple reboot helps resolve issues like these.
How do you continue the Apple Watch setup?
To continue setting up your Apple Watch. Open your Apple Watch App on your phone and follow the instructions that appear on the screen.
Can you use your Apple Watch without iPhone?
You don’t need an iPhone to use the Apple Watch. But some of the services and functions may not be available for use whenever you don’t have an iPhone.
How Can you Download OnlyFans Videos on iPhone?
How can you skip the Apple Watch setup?
There are many ways for skipping the Apple Watch setup. You could also just plug your Apple Watches into your computer using a USB cable and delete them from there. If you want to set up an Apple Watch, you can either open the Apple Watch app from your phone and then click “Setup” or visit apple.com/watch and follow the on-site instructions.
Do you need an iPhone to set up an Apple Watch?
The answer is no. You can use a Mac or PC, and the watch will work just fine.
Also read other interesting articles:
